Home - Concept Boats - Sail Boats - Norseman 32

Norseman 32

Profile 'Norseman 32' yacht / sail boat design
    Length:  32’

     Beam:   11’2”

     Draft:   5’3”

     Displacement:  21,700 lbs.

     More Pictures

     The Norseman 32 is styled after a Norwegian fishing boat called a Skøyte.  The Skøytes evolved over the years to be extremely functional and user friendly.  They had to handle the North Atlantic at its worst while being economical to run.  The wheel house had to have good all around visibility and easy access to the deck.  Above the waterline the Norseman 32 is very close in appearance to these boats.  They had clear topsides which were oiled and white bulwarks and wheel house.  The bottom of the Norseman 32 has been modernized with less forefoot in front and slightly deeper keel.  The aft end has been stretched to create a longer water line and a swim platform.  The twin simulated rudders are used as a ladder for easy access to the boat.  The traditional rig of the Skøyte was the Gaff.   We show a main Gaff without the topsail, feeling that topsails seldom get used due to their complexity in rigging.  Being a motorsailer, the sail area is modest, and could be enhanced with drifters set off the wind.  The purpose for this short sail is to allow the masts, which are stepped in tabernacles, to be lowered into cradles within the length of the vessel, making inland waterway cruising easy.  The rigs are split into three sections for good balance under all conditions.  If desired, these vessels can be rigged with much more sail area than shown by using a taller mast that would not be set in a tabernacle and would only be unstepped for service.  
© 2006 - 2016 Moose Island Design  •  43 Key Street  •  Eastport, ME  04631  •  (207) 853-2765